Tempered glass shelf with metal wall plate, concealed bolts and integrated cable management
Holds DVD player, VCR, cable box, satellite, etc., with support for up to 30 lbs.
Pivoting arm for side-to-side movement; black nylon stabilizing strap
Includes complete hardware kit for installation; single-stud mounting
Dimensions: 18.0 x 9.1 x 20.1 inches (457 x 231 x 571 mm) (W x H x D)
This review is from: OmniMount ECSB Component Shelf for CRT TVs & Video AccessoriesThis shelf is quite attractive and easy to install. The depth of it is greater than I was imaging, so if you're using it for a smallish item (like a DVD or cable box), it will stick out form the wall farther than you need....
This review is from: OmniMount ECSB Component Shelf for CRT TVs & Video AccessoriesThis is a great wall mount shelf. There aren't a lot of 30 lb shelf mount speakers out there. I have Klipsch RS-62s that weigh in at 26 lbs each, and the shelves accomodate them. The down side is that one of the shelves was sent with screws that had no thread! Also you HAVE TO install thise into a stud, period! When you initially drill, make sure you find wood shavings as the drill bit comes out. When you install drill the other holes, MAKE SURE you measure from the ground to the top of the wall plate to assure the speakers will be at the same height. Also, make sure that before you do your drilling deep, LEVEL the plate using a LEVEL you can buy at any hardware store, so your speakers don't tilt in one direction or the other. Make sure the top side is on TOP and put the plastic cover on BEFORE you attach the glass, and that the glass is faced so the rounded edge is in the front! Good Luck!...
This review is from: OmniMount ECSB Component Shelf for CRT TVs & Video AccessoriesThis OMNIPOINT Glass component shelf was simple to install and strong enough for my VCR & Satellite Receiver. The shelf glass shelf is fixed to the support arm and the support arm can swivel left & right about 20 Degrees. The only downside is that the glass shelf and projection from my wall is a little large for my location. I wish OMNIMOUNT has several sizes of this model available. If so, then I missed seeing it. Not a problem. Have a strong drill to pre-drill the screw holes into the wall. All said, I am fully pleased with this item....
Detail Products
Detail Reviews
Click here for more information
»»»Visit Store NOW...
Best price click here
