Adapter plate extends 17.63" to fit most projectors
Distance from wall: PPA: 9.95-14.06", PPB: 13.95-21.94" (PPC will not mount to wall)
Safety catch design to ensure user and equipment safety
This review is from: Projector Ceiling/wall Mount 17.2IN-25.2IN Adjustable Extension (Black)I bought one of these mounts due to an unusual mounting situation and it worked so well I bought another on for a similar issue. The product is great! Very flexible (including the ability to adjust the distance from the mounting wall) and all of the adjustment screws are standarized and therefore use the same allen wrench (which is included!). Adjustments are nearly infinite and flexible. I highly recommend it....
This review is from: Projector Ceiling/wall Mount 17.2IN-25.2IN Adjustable Extension (Black)First the good news: I successfully used this mount to install my 20 lb. projector. That is, along with about $15 of additional parts and hardware and lots of time. My projector is 18 inches long and 14 wide and easily fit, although I did need some longer screws (various short ones are supplied) to attach the mount spider to the bottom of the projector. I do especially like one feature: When mounting the projector/spider assembly, there is an easy-to-use hook to hang that assembly in place on the ceiling strut, so there's no installing screws while holding up something heavy. And it has been up for a week, hasn't fallen down, and does not appear to have shifted.Here's what I didn't like: First, this mount is not really designed for use with a suspended ceiling grid. The installation manual describes only drywall over wood joists, and concrete installations. Same for cantilevered (using an included right-angle piece at the projector) wall mounting. Two #14 wood screws, 2.5 inches long, are included to attach the mount to a ceiling or wall, and are intended to be screwed into the center of the narrow edge of a wooden ceiling joist or wall stud. Also included are concrete expansion anchors. I couldn't use any of this hardware. To install the mount where I had to put it, I rigidly attached a piece of 3/4" plywood across two joists, and through-bolted the mount to the plywood.No ceiling trim plate is included, and I didn't find one on the Peerless web site. I made mine by modifying a lighting fixture ceiling trim (canopy), and it nicely covers the cut edge of my ceiling panel.The mount is assembled and adjusted using tamper-resistant/security metric socket pin screws. Better hang on to that supplied 4 mm tamper-resistant capable Allen wrench, as a standard metric Allen wrench will not work, and a replacement may be difficult to find.My results are adequate, not beautiful. It isn't very rigid, but maybe some of that is from the plywood I used in the mounting. I'm not sending it back, but I think there are better mounts out there....
This review is from: Projector Ceiling/wall Mount 17.2IN-25.2IN Adjustable Extension (Black)I bought this so that I could mount it on a wall. My ceiling is vaulted. It had all the hardware that I needed and I was able to install it in less than 30 minutes....
Detail Products
Detail Reviews
Click here for more information
»»»Visit Store NOW...
Best price click here
